Square Counterflow Cooling Tower
Air moves vertically upward against the downward water flow for high thermal performance per unit footprint. A braced steel structure with enhanced anti-corrosion treatment makes this counterflow cooling tower a workhorse for petroleum, chemical, metallurgical and power plant circulating water systems.

The square counterflow cooling tower combines strong thermal performance with low power consumption, stable structure, clean appearance, low noise, short installation time and competitive capital cost. It is widely used in large circulating water systems in petroleum, chemical, metallurgy and power generation.
The load-bearing structure is steel, with a lattice of multi-directional diagonal bracing for overall rigidity; maximum operating amplitude is controlled to 0.15 mm. All structural steel receives enhanced anti-corrosion treatment for long service life in humid, industrial atmospheres.
Pressurised spray distribution and enclosed film fill give compact plan dimensions and resist sunlight-driven algae growth. Counterflow geometry places the coldest water in contact with the driest air, which is why a counterflow tower typically delivers a tighter approach than a comparable crossflow unit.
Multiple cells can be arranged in a bank, and materials, fill type, fan drive, noise attenuation and control packages are selected to match the specified heat load, water quality and design wet-bulb temperature.
Key advantages
High thermal efficiency
Counterflow geometry gives more cooling duty per square metre of footprint.
Rigid steel structure
Lattice multi-directional bracing; operating amplitude controlled to 0.15 mm.
Long service life
Enhanced anti-corrosion treatment on all structural steel.
Fast installation
Factory-fabricated modules shorten site work and commissioning.
Configurable
Fill, fan, noise package and controls matched to the specified duty.
Specification & configuration
| Airflow arrangement | Counterflow, induced draft, pressurised spray distribution |
|---|---|
| Circuit | Open circuit / direct evaporative cooling |
| Structure | Braced steel frame, enhanced anti-corrosion protection |
| Operating amplitude | Controlled to 0.15 mm |
| Fill media | Film fill; splash / anti-fouling options for poor water quality |
| Capacity | Project-specific thermal selection — single cell to multi-cell banks |
| Options | Low-noise fans, VFD, high-temperature fill, stainless / HDG structure, drift eliminator upgrade |
Typical applications
- Petroleum refining
- Chemical & petrochemical plants
- Metallurgy and steel works
- Power plant circulating water
- Large industrial chiller plants
Product gallery
Tell us about your cooling duty
Share your flow rate, inlet / outlet water temperature and design wet-bulb temperature — we will size the right tower for you.
Talk to a cooling tower engineer
Technical selection, drawings and a quotation — usually within one business day.


