+86 400 992 9188 Monday – Saturday, 08:30 – 18:00 (GMT+8)
Global supply · Factory direct 中文
FAQ

Cooling tower questions, answered

Technical and commercial answers for engineers, procurement teams and plant operators.

The essentials are the heat load or circulating water flow rate, hot-water inlet temperature, required cold-water outlet temperature, and the design wet-bulb temperature at the site. Water quality, available footprint, noise limits, power supply (voltage and frequency) and whether the loop must stay closed are also important. With these inputs our engineers complete the thermal selection and recommend a crossflow, counterflow, round FRP or closed circuit configuration.
In a crossflow tower, air moves horizontally across the falling water; gravity-fed basins give low pump head, easy access for cleaning and generally quieter operation, at the cost of a larger footprint. In a counterflow tower, air moves vertically upward against the water, giving a more compact footprint and higher thermal performance per unit area, but with higher pump head and tighter internal access. Both are available as induced-draft open-circuit or closed-circuit designs.
Choose a closed circuit (fluid) cooler when the process fluid must remain clean and sealed — for example induction furnaces, glycol or water-side economiser loops, power electronics, laser equipment or sensitive chemical processes. The fluid flows inside a tube bundle while a separate spray-water loop and air cool the outside of the coil. The trade-offs are a higher initial cost and a slightly warmer approach for the same size; the benefits are no contamination, less scaling, reduced water treatment, and the option to stop the spray pump in cold weather.
Range is the temperature drop across the tower: inlet hot-water temperature minus outlet cold-water temperature. It is set by the process heat load and the circulation rate, not by the tower. Approach is the difference between the cold-water outlet temperature and the ambient wet-bulb temperature; it reflects how close the tower gets to the theoretical limit and is where tower size and cost are decided. Tightening the approach sharply increases the required fill volume and footprint.
Price depends on cooling capacity, type (open, closed, fanless or hybrid), materials (FRP, galvanised steel, stainless steel, copper coil), fan and motor brand, fill and drift eliminator quality, controls, noise requirements, and export packing. Rather than a generic list price, we quote against the approved thermal selection and configuration. Send your duty conditions for a factory-direct quotation within one business day.
We are the manufacturer: Anhui Liangyue Intelligent Machinery Manufacturing Co., Ltd., founded in 2019, headquartered in Huaibei, Anhui, China, with a 22,000 m² production base, automated lines and annual capacity above 30,000 units. Factory audits, video inspections and third-party inspection before shipment are welcome.
Our quality system is certified to ISO 9001 and ISO 14001, with CTI-related thermal performance documentation and testing by the National FRP Product Quality Testing Center. CE and other project-specific documentation can be discussed for export destinations. Copies of certificates and test reports are available on request.
There is no fixed interval — it depends on water quality, treatment, suspended solids and operating temperature. Inspect the fill annually for scaling, biological growth, deformation or collapse. A rising approach temperature, higher fan power or uneven wetting are signs that cleaning or replacement is due. We supply PVC film, splash and anti-fouling fill blocks, plus nozzles, drift eliminators, fans, motors and reducers as spare parts.
For towers idle in winter, completely drain the spray water and the internal process water; our coil is sloped for self-drainage and has an air valve at the top so compressed air can assist drain-down. For part-load winter operation, keep minimum flow through the coil, stage or stop the spray pump, control fan speed by temperature, protect exposed piping and use an approved glycol solution where appropriate. We provide a site-specific winter operating procedure.
Noise comes from the fan, motor / drive train and falling water. Measures include low-noise airfoil FRP fan blades, super-low-noise motor packages, VFD speed reduction at part load, vibration isolation, acoustic barriers or screens positioned to avoid airflow recirculation, and water-distribution designs that reduce splash noise. A fanless water-driven tower removes the motor and gearbox entirely.
Drift is the small water droplets carried out of the tower with the exhaust air. It wastes water and treatment chemicals, can wet nearby equipment and is part of the hygiene discussion around evaporative cooling. High-efficiency drift eliminators capture those droplets and can bring drift loss down to a very small fraction of the circulation rate. They are a standard item on our towers and a common upgrade for existing installations.
Yes. We supply factory-assembled packaged towers and modular / field-erected designs with export packing, consolidated shipping, documentation, installation drawings, commissioning guidance and remote engineering support. Motor voltage and frequency, fan noise levels, materials and control panels can be specified for the destination market. Spare-parts kits can be shipped with the equipment.
In many cases yes. Send photographs, the nameplate, or the dimensions of the fill block, fan, nozzle, motor or reducer and we will identify a compatible replacement. We supply PVC fill, drift eliminators, spray nozzles, distribution pipes, rotary heads, axial fans, motors, gear reducers, support pillars and brass float valves.
It replaces the electric fan motor with a hydraulic turbine powered by the surplus pressure head already available in the circulating water system. The recovered energy drives the fan, so no additional pump electricity is needed and the motor, gearbox and tower electrical supply are eliminated. It suits new installations and retrofits where enough residual head is available; we verify the hydraulic conditions before recommending it.
Start a project

Still have a question?

Our engineers can review your duty conditions and recommend a configuration.