+86 400 992 9188 Monday – Saturday, 08:30 – 18:00 (GMT+8)
Global supply · Factory direct 中文
Product family

Closed Circuit Cooling Tower

A tube-bundle heat exchanger inside the tower keeps the process fluid in a clean, sealed loop while spray water and air reject heat outside the coil. Closed circuit cooling towers protect water quality, cut scaling, save water in cold weather and extend the service life of critical equipment.

Induction furnaces & heat treatment Data center and process glycol loops Air compressors & injection moulding
Closed Circuit Cooling Tower - industrial cooling tower

In a closed circuit cooling tower (also called a closed loop fluid cooler or evaporative fluid cooler), the process fluid never contacts ambient air. It flows inside a tube bundle while a separate spray-water loop wets the coil and induced air carries away the heat of evaporation. This indirect arrangement prevents contamination, scaling and oxygen ingress in the primary loop.

Stability: soft or treated water circulates in a sealed loop, so high-temperature scaling is avoided — protecting equipment such as induction furnaces from gradual overheating damage. Parameter setting and alarm systems keep the cooling process stable.

Water and energy savings: no excavation of a large basin is required and the unit can be relocated. At low ambient temperatures the spray system can be shut down for dry operation. Fan speed and spray volume are modulated with ambient conditions, so the fan and pump only run at the duty actually required.

Environmental performance: the sealed internal circuit protects circulating water, evaporation losses are small, and the risk of water-based bacteria around the tower is reduced. Corrosion-resistant metal construction typically delivers 8–10 years of service with proper maintenance. Our engineering team also provides winter freeze-protection strategies for both idle and part-load operation.

Key advantages

01

Clean process loop

Indirect coil heat exchange keeps the fluid sealed and uncontaminated.

02

Water saving

Spray water can be stopped in cold weather; no large basin required.

03

Energy saving

Fan and spray pump staged or modulated to ambient conditions.

04

Freeze protection

Sloped self-draining coil, air valve, compressed-air assisted drain-down.

05

Long service life

Corrosion-resistant metal construction, typically 8–10 years with proper care.

Specification & configuration

CircuitClosed circuit / indirect evaporative cooling (fluid cooler)
Heat exchangerTube coil bundle, sloped for complete self-drainage
Spray systemIndependent spray-water loop with staged pump control
AirflowInduced draft, top-mounted axial fans
Process fluidWater, glycol solution, quench oil or other clean media
CapacityProject-specific thermal selection — single module to multi-module banks
OptionsFreeze-protection package, VFD, PLC / alarm panel, stainless coil, low-noise fans, plume abatement

Typical applications

  • Induction furnaces & heat treatment
  • Data center and process glycol loops
  • Air compressors & injection moulding
  • Power electronics and welding equipment
  • Chemical and mechanical processing

Product gallery

Project inquiry

Tell us about your cooling duty

Share your flow rate, inlet / outlet water temperature and design wet-bulb temperature — we will size the right tower for you.

We reply within 1 business day. Your details are used only to answer this inquiry.
Start a project

Talk to a cooling tower engineer

Technical selection, drawings and a quotation — usually within one business day.