+86 400 992 9188 Monday – Saturday, 08:30 – 18:00 (GMT+8)
Global supply · Factory direct 中文
Insights

FRP Cooling Tower Maintenance: A Field Checklist

A simple inspection routine for FRP packaged towers covering distribution, fill, fan drive, basin and the shell itself.

FRP Cooling Tower Maintenance: A Field Checklist

Monthly and quarterly checks

Monthly: listen for new vibration or bearing noise, check the rotating distribution header turns freely, verify spray coverage has no dry zones, confirm the basin water level and float valve operation, and look for unusual drift at the fan discharge.

Quarterly: inspect fan blade leading edges and hub bolts, motor current against nameplate, belt or gearbox condition, fill deformation or scale, drift eliminator gaps, and the FRP shell for cracks, chalking or UV damage.

Cleaning and water treatment

Remove sludge from the basin before it is drawn into the pump, clean blocked nozzles, and keep up the biocide, scale-inhibitor and conductivity-based blowdown programme. Never use high-pressure water directly on soft PVC fill — it collapses the flutes and permanently reduces performance.

Keep a small stock of consumables: nozzles, fill blocks, drift eliminator sections, fan belts or reducer seals, and float valves.

When to call for parts

A rising approach temperature, increasing motor current, uneven wetting or visible sagging of the fill are signals to plan a shutdown. Send photographs and dimensions and we can identify compatible replacement parts, including cross-brand matches.

Need this applied to your project?

Send your heat load, flow rate and design wet-bulb temperature for a technical proposal.

Request a Quote
Start a project

Talk to a cooling tower engineer

Technical selection, drawings and a quotation — usually within one business day.